Symptom
Suggestion
The handset doesn't
•
Change the Digital Security Code (see
communicate with other
•
Make sure that you have registered all handsets (see
handsets.
page 20).
An extra handset can't join the
•
Make sure there are not two handsets already using the conference feature.
conversation.
•
Make sure that another handset is not in privacy mode.
Room Monitor does not work.
•
Make sure to place the handset(s) within the range of the base.
The answering system does
•
Make sure the base is plugged in.
not work.
•
Make sure that the answering system is turned on.
Time stamp cannot be heard.
•
Make sure you have set the time (see
•
Make sure that the message record time is not set to announce only.
Messages are incomplete.
•
Incoming messages may be too long. Ask callers to leave a brief message.
•
The memory may be full. Delete some or all of the saved messages.
There is no sound on the
•
Adjust the speaker volume on the base or handset.
base or handset speaker
•
Make sure the call screen feature is set to on.
during call monitoring or
message review.
Cannot access answering
•
Make sure you are using the correct PIN number.
system from a remote phone.
•
Make sure that the touch-tone phone you're using can transmit the tone for at least two
seconds. If it cannot, try using a different touchtone phone.
Changing the Digital Security Code
Registering Accessory Handsets
Setting the Day and Time
[63]
on page 61).
on
on page 17).