Selecting.the.base - Uniden DECT1588 Series Owner's Manual

Selecting the base
After.you.register.your.handset.to.more.than.one.base,.you.can.set.the.handset.to.automatically.search.for.a.new.
base.if.the.base.it's.currently.connected.is.unavailable.or.out.of.range..You.can.also.manually.select.which.base.you.
want.the.handset.to.connect.to;.for.example,.if.you.have.one.base.with.an.answering.machine,.you.can.connect.to.
that.base.to.check.messages.from.the.handset.
1).With.the.phone.in.standby,.press.MENU/SELECT..Select.the.Handset Setup.menu,.and.then.the.Select Base.
submenu.
2).Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.Auto.to.have.the.handset.automatically.
search.for.and.select.base.
3).Press.MENU/SELECT..Searching.will.appear.in.the.display.
4).When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,."Searching".continues.
to.appear..You.can.repeat.the.procedure.listed.above.to.return.back.to.the.original.connection.or.to.find.the.
different.base.
Note:. You.cannot.change.bases.during.a.call..
15