Uniden DECT1588 Series Owner's Manual page 52

On the base unit, pull the handset
retainer out of the slot.
Rotate it clockwise 180 degrees and
flip the retainer from front to back.
Slide it back into the slot.
The retainer holds the corded
handset in place.
Place the mounting slots over the
pins on the wall plate.
(To AC outlet)
Notes:.Mounting.the.phone.directly.on.the.wall
•. Be.sure.the.wall.is.capable.of.supporting.the.weight.
of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material.
•. Insert.two.#10.screws.(minimum.length.of.1.
inches,.not.supplied).into.the.wall,.3.
apart..
•. Leave.the.screw.heads.
allow.room.for.mounting.the.phone..
•. Align.the.mounting.slots.over.the.screws.and.slide.
the.base.down.into.place.as.shown.above.
52
Wall plate
Slide the base
down to lock it
into place.
/
3
8
/ .inches.
15
16
/ .inch.away.from.the.wall.to.
1
8
.