Base Pin Code; Selecting A Base - Uniden AMWUC511 Owner's Manual

UC504DH(DECT160-2) OM 8/17/06

Base PIN code

You need to enter the base PIN code when you
are registering handsets. For security reasons you
may wish to change the PIN code. You can
choose a PIN code up to 4 digits long.
If you reset the base from the handset, base PIN
code will be 0000.
Always keep a record of your base PIN code.
Note your PIN code and keep it in a safe place.
If you change the PIN code you will need to use
the new code for any handset registered to your
base.
1 Press to access the main menu.
2 Press or until Base Settings
displayed and press .
Base PIN
3 Press or to display
press .
4 Enter a new PIN code (up to 4 digits) and
press .
5 Press to exit and return to standby.
3:38 PM Page 29

Selecting a base

You can register a handset to up to 4 bases, e.g.
one at work and one at home or one upstairs and
one in the garage, and switch between them.
Once your handset is registered with other bases,
you can either specify the base you want to use
or, select Automatic
the base with the strongest signal.
1 Press to access the main menu.
2 Press or
Press .
3 Press or
Press .
is
4 Press or
the base number. Press
and
[29]
for your handset to choose
to select Add. Settings .
to select Select Base .
to select Automatic or
.