Selecting The Base - Uniden WXI2077 Series Product Manual

Uniden wxi2077 series multi-handset phone with a waterproof handset product manual

Hide thumbs Also See for WXI2077 Series:

Table of Contents

Selecting the base

When your handset is registered to another base, it will automatically connect to the base. A base ID (that is for the

handset only) will be assigned in the order of registration. You can either select a base you want to use manually, or

set to AUTO. If you set to AUTO, when the handset comes out of range, it searches automatically the available base

in order of base ID.

With the phone in standby, press Menu/Select. Select the HANDSET SETUP menu, and then the SELECT

BASE submenu.

)

Move the cursor to select the base you want to connect to, or choose AUTO to have the handset automatically

select the base.

Press Menu/Select. SEARCHING will appear in the display.

When the base is found, the handset will return to standby. If the base is not found, "SEARCHING" continues

to appear. You can repeat the procedure listed above to return back to the original connection or to find the

different base.

Note: You cannot change bases during a call.

Table of Contents