Using.multiple.bases; Registering.the.handset.to.another.base - Uniden DECT1588 Series Owner's Manual

Using Multiple Bases
The.handsets.supplied.with.your.phone.can.be.registered.to.a.total.of.four.different.bases..Compatible.bases.include.
the.DECT1500.series.and.the.WXI2077.series..(See.our.website.or.contact.Customer.Service.for.an.up-to-date.list.
of.compatible.models.)
Note:. To.confirm.how.many.bases.the.handset.is.registered.to,.open.the.Select Base.submenu.(follow.the.step.1.of.
Selecting.the.base.on.page.15)..Press.END.to.close.the.list.and.return.to.standby.
Registering the handset to another base
To.register.a.handset.to.another.base:
1).Make.sure.the.handset.battery.is.fully.charged.
2).If.the.other.base.has.an.LCD.display:
•. With.the.phone.in.standby,.press.MENU/SELECT.on.the.base..Move.the.cursor.to.select.the.Register
Handset.menu,.and.then.press.MENU/SELECT..Handset Registering.will.appear.
If.the.other.base.does.not.have.an.LCD.display:.
•. Disconnect.the.base.AC.adapter..Then.press.and.hold.the.Find Handset.key*.while.you.reconnect.the.
adapter..Keep.holding.the.Find Handset.key.until.the.charge.LED.starts.to.blink.
*This.key.might.be.labeled.Find.or.Find HS.
3).On.the.handset,.press.MENU/SELECT..Select.the.Register Base.menu..Handset Registering.will.appear.in.the.
display..(After.step.2,.you.have.thirty.seconds.to.complete.this.step.3.before.the.system.returns.to.standby.)
4).Wait.approximately.thirty.seconds..Registration complete.will.be.displayed.to.indicate.the.handset.has.been.
registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned..The.handset.assigns.its.own.ID.to.this.
base,.too..(Since.the.base.ID.is.based.on.the.order.in.which.the.handset.was.registered.to.the.different.bases,.a.
base.may.have.different.IDs.on.each.handset.)
If.Registration failed.appears.in.the.LCD,.please.try.these.steps.again.
Note:. The.handset.will.stay.connected.to.the.new.base.until.you.select.a.different.base.(see.below).
14