Cisco ASR 1002-F Overview And Installation page 32

Cisco ASR 1002-F Router Overview and Installation
Connecting AC Input Power to the Cisco ASR 1002-F Router
Figure 24: Cisco ASR 1002-F Router AC Power Supply in Slot 1 with Power Cord
1 AC power cord and service loop — —
b) Run the power cord below the handles of power supplies in slot 0 and slot 1. Make sure the power cord is hanging
loose so that it will not be disconnected from the AC power inlet as shown in the foloiwng image.
Figure 25: Cisco ASR 1002-F Router AC Power Supplies in Slot 0 and Slot 1 with Power Cord
Caution Do not run the AC power cord through the power supply handles as shown in the following image.
Figure 26: Incorrect Cabling on the Cisco ASR 1002-F Router AC Power Supplies
Cisco ASR 1002-F Router Overview and Installation
32