Cisco ASR 1002-F Overview And Installation page 18

Chassis Rear Rack-Mount Brackets
SUMMARY STEPS
1. Locate the threaded ear holes on the rear side of the chassis. Make certain that you hold the rear rack-mount
bracket with the ear and holes facing outward and towards the rear of the chassis.
2. Position the rear rack-mount bracket top hole with the chassis top hole from the back.
3. Insert and tighten the screws on one side.
4. Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the rear
rack-mount brackets to the chassis.
DETAILED STEPS
Step 1 Locate the threaded ear holes on the rear side of the chassis. Make certain that you hold the rear rack-mount bracket with
the ear and holes facing outward and towards the rear of the chassis.
The following image shows where to attach the rear rack-mount brackets to the Cisco ASR 1002-F Router.
Figure 14: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1002-F Router
1 Rear rack-mount bracket ear and holes
2 Rear rack-mount bracket
Step 2 Position the rear rack-mount bracket top hole with the chassis top hole from the back.
Step 3
Insert and tighten the screws on one side.
Step 4 Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the rear rack-mount
brackets to the chassis.
What to do next
This completes the steps for attaching the rear rack-mount brackets to the Cisco ASR 1002-F Router.
Caution
Before you mount the Cisco ASR 1002-F Router in a rack, make certain you understand which rack-mount
bracket ear holes to use when positioning the chassis in the rack. As a result of using the designated ear holes
on the rack-mount bracket, the cable-management bracket installation will be made easier.
Cisco ASR 1002-F Router Overview and Installation
18
3 Rear rack-mount bracket screws
— —
Cisco ASR 1002-F Router Overview and Installation