Accessing The Fault Count Screen; Accessing The Setup Mode; Accessing The Test Mode; Setup Mode - TurboChef 3240 Service Manual

1 6 O V E N M O D E S

Accessing the Fault Count Screen

Refer to page 29 for fault descriptions.
From the
CONFIG MODE
press R1 to access the fault count screen (Figure
13). The oven will display the number of faults
that have occurred since the oven fault counts
were last cleared (page 20), the oven's software
was last updated (page 15), or the oven was last
returned to the manufacturer's default settings
(page 20).

Accessing the Setup Mode

From the
CONFIG MODE
press L1 to access the
allows the user to customize several oven
MODE
settings - see below for more details.

Accessing the Test Mode

From the
CONFIG MODE
press R3 to access the
gives the service agent the ability to
MODE
diagnose oven problems and perform other serv-
ice related tasks. See page 17 for more informa-
tion on the
TEST MODE

Setup Mode

Figure 14
The
SETUP MODE
1. To change the display temperature.
2. To access the edit option screen.
L1
L2
L3
Figure 13: Fault Counts Screen
L1
L2
L3
Figure 14: Setup Mode
(Figure 9, page 15),
(Figure 9, page 15),
. The
SETUP MODE
(Figure 9, page 15),
. The
TEST MODE
.
serves four main purposes:
FAULT COUNTS
F1: 0 F6: 0
F2: 0 F7: 0
F3: 0 F8: 0
F4: 0 F9: 0
F5: 0 F10: 0
DEGS F ENGLISH
SETUP MENU
EDIT/RIGID/FLEX
3. To change the display language.
4. To access the info screen.
To access the
from the
(to access the

Changing the Display Temperature

The oven can display the temperature in either
Celsius or Fahrenheit units. To change the
display temperature, press L1 in
(Figure 14).

Edit Option Screen

SETUP
The edit option screen (Figure 16) allows the
user to switch between full edit, rigid, and flex
options. For more information on the different
edit options, see Editing a Cooking Profile on
page 12.
To access the edit option screen,
TEST
1. Press L3 (Figure 14) to access the password
screen (Figure 15).
2. Input the password
soft key adjacent to the appropriate number.
To change the edit option (Figure 16),
-Press L1 to select the full edit option.
-Press L2 to select the rigid option.
-Press L3 to select the flex option.
R1 L1
R2 L2
R3 L3
Figure 15: Password Screen
R1 L1
L2
R2
R3 L3
INFO
Figure 16: Edit Option Screen
, press the up key
SETUP MODE
or
OVEN OFF COOLING DOWN MODE
), and then press L1.
CONFIG MODE
SETUP MODE
6 6 3 3 by pressing the
1
ENTER PASSWORD
<6633>
2
3
FULL EDIT*
EDIT OPTION
RIGID
FLEX
R1
4
R2
5
R3
6
R1
R2
R3