Simotics Connect 400" Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

3.2

"SIMOTICS CONNECT 400" connectivity module

The connectivity module mounted on the motor captures important operating and status
information of the motor.
The captured motor data are transmitted to SIDRIVE IQ Fleet via a WLAN interface and
analyzed.
Note
The SIMOTICS CONNECT 400 connectivity module can be used in combination with rib-
cooled low-voltage induction motors (see Technical specifications (Page 74)).
Components
The connectivity module encompasses the following components:
● Integrated sensors to measure the motor data
● Data memory
● Processor
● SPBTLE-RF Bluetooth module for communication with a mobile device for commissioning
and configuring the connectivity module
● SN8000/8000UFL WLAN communication module for transmitting the measured data to
SIDRIVE IQ Fleet and updating the firmware
● Lithium battery for the power supply
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA
3.2 "SIMOTICS CONNECT 400" connectivity module
Description
13