Operation; Identifying The Connectivity Module Via The "Sidrive Iq Config" Application - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Operation

7.1 Identifying the connectivity module via the "SIDRIVE IQ Config"
application
Each connectivity module has a blue LED display in the front cover. The LED display is used
to visually identify the connectivity module that is currently connected to "SIDRIVE IQ Config"
more easily.
Use the "Identify" function to check that you are connected with the required connectivity
module.
Procedure
1. Open the "SIDRIVE IQ Config" application.
2. Open the overview page.
3. Select an asset from the "Visible" tab.
4. Tap on the motor symbol
The connectivity module LED flashes. The firmware version is read out and displayed.
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA
in the list entry.
7
51