7.4
Adapting the location settings
During commissioning of the connectivity module, the location of your asset is determined
using the location services of your mobile device. If the location of your asset changes after the
connectivity module has been commissioned, change the location setting of your asset
accordingly.
Note
The "geolocation related functions" are not supported in several regions due to local
regulations.
Precondition
There is a WLAN access point (Page 17)to connect the connectivity module to the Internet.
Procedure
1. Select the "Settings" menu.
2. Select the "System" submenu. The longitude and latitude degrees are displayed as decimal
degrees for the current location.
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA
7.4 Adapting the location settings
Operation
55