Mounting The Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Mounting and installation

5.1 Mounting the connectivity module

5.1 Mounting the connectivity module
For easier handling while mounting on the motor, we recommend first screwing the connectivity
module to the mounting bracket. The battery is not contacted in the delivered condition.
Mounting elements
The following figures provide an overview of the relevant mounting elements of the connectivity
module in the closed and open condition:
①
②
20
Front cover
Cover fastening screws
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA