Siemens SIMOTICS CONNECT 400 Operating Instructions Manual page 30

Commissioning
6.3 Establishing the connection to the connectivity module
"Device overview" page
When the "SIDRIVE IQ Config" application starts, by default, you see a list of all of the currently
visible assets on the "Device overview" page. You can also display all of the assets visible in
the history. A list entry contains the information about an asset. The following diagram explains
the pictograms in a list entry.
①
②
③
④
⑤
⑥
⑦
28
To identify an asset, press the motor icon (LED of the sensor module flashes)
You see all of the currently visible assets under this tab.
BLE name and MAC address of the currently selected connectivity module
Under this tab, you see all of the assets visible in the past.
Connection status of the connectivity module to the MindSphere application SIDRIVE IQ Fleet
(onboarding status)
● "Green" status: Connected
● "Orange" status: Connected, but connection currently disturbed
● "Red" status: Not connected
If necessary, confirm a pairing request to establish the Bluetooth connection
Bluetooth interface signal strength display
WLAN configuration status of the connectivity module:
● "Green" status: WLAN configured and operating correctly
● "Red" status: WLAN not configured or has a fault
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA