Maximum Heating Time; Locking The Keypad; Resetting Parameters - Dimplex Edel EDL200UK-630 Installation And User Instructions Manual

7.11.2.5 Maximum Time
A period of time can be chosen where the electrical
back-up will run at the same time as the heat pump to
speed up the heating of the water in the tank.
If you choose Max. Time= AUTO, the heating time is
limited to 5 hours maximum.
Max. Time
No
- This function is deactivated by default.
- Press 'Menu' to return to the main screen.
7.11.3 Locking the Keyboard
Permanent and automatic locking
The "Locking" option enables you to create two
possible levels of locking for accessing the menus.
In the "Installer" menu, turn the dial to "Locking".
LOCKING
NO = Locking is not activated but manual locking is
possible by pressing 'Menu' for 3 seconds.
o
50 C
Press for
AUTO = To lock menu access with temporary unlocking
(60) sec, press 'Menu' for 3 seconds.
Max. Time
3h
Select time period between
1 and 24 hours
Enter
LOCKING
NO
Select No
Enter
UNLOCK
NO
Select Yes
3 secs
Enter
Set-Up and Use
Manual Locking from the Main Screen
Without gaining access through the 'installer' menu and
provided that locking settings are not already in place.
Press for
3 secs
- Press 'Menu' to return to the main screen.

7.11.4 Resetting Parameters

Resetting the parameters enables you to go back to the
default settings. Go to the 'Installer' Menu and turn the
dial to 'Reset'.
RESET PAR
LOCKING
RESET PAR
YES
Select 'YES'
ENTER
18