Field Servicing; Replacement Parts - Johnson Controls S300 Series Hardware Installation Manual

Hardware Installation
6. Insert the new battery into holder.
The lithium battery is polarized. Ensure the side marked '+' faces
!
out or towards you.
CAUTION
Danger of explosion if battery is incorrectly replaced.
WARNING
7. Mate the top of the plastic enclosure to the base.
8. Re-connect the 24 VDC power to the RSR2S.

Field Servicing

Troubleshoot the RDR2S by substituting the suspected defective module with a new
component.
All replaceable parts are available from Johnson Controls, Inc.
Consult your Customer Success Center representative at (800) 482-2778 for
domestic orders or for instructions on how to obtain replaceable parts.

Replacement Parts

For instructions on how to obtain order replacement parts, consult your Customer
Success Center representative at (800) 482-2778.
For more information on the parts listed, refer to the applicable product bulletin.
Model No.
S300-DIN-L
S300-DIN-S
S300-DIN-RDR2S
S300-DIN-PA1
S300-BAT
S300-BAT-2.8H
S300-DIN-BRK
S300-DIN-L-PS
S300-DIN-S-PS
S300-XFMR
38
S300-DIN-RDR2S Module
Description
Large enclosure, DIN rails, 5A power supply.
Small enclosure, DIN rail, 1.5A power supply.
2-door interface terminal with 4-state inputs.
Accessory kit. See the "S300-DIN Parts Accessory Kit"
section.
12V, 7.2AH battery for S300-DIN-L.
12V, 2.8AH battery for S300-DIN-S.
Battery bracket kit for either enclosure.
Power supply, 24 VDC out, 110 VAC in.
Power supply, 24 VDC out, 24 VAC in.
Plug-in transformer, 24 VAC, 50VA.
This document contains confidential and proprietary information of Johnson Controls, Inc.
24-10239-413 Rev. A
© 2010 Johnson Controls, Inc.