Table of Contents
Advertisement
storcli /cx/fall show [all] [securityKey = xxx]
storcli /cx/fall del|delete [securityKey = xxx]
storcli /cx/fall import [preview] [securityKey = xxx]
storcli /cx set factory defaults
storcli /cx download file=<filepath> [fwtype=<val>] [ResetNow] [nosigchk]
[noverchk] [force]
storcli /cx show personality
storcli /cx set personality=RAID|HBA|JBOD
storcli /cx show AliLog [logfile[=filename]]
storcli /cx get config file=<fileName>
storcli /cx set config file=<fileName>
storcli /cx/cv show
storcli /cx/cv show all
storcli /cx/px show
storcli /cx/px show all
To show a summary of the drive and controller status:
storcli show
To show a list of all controllers and drives that need attention:
storcli show all
NVMe commands
Learn about the NVMe commands.
If the nvme command is not installed, download the utility from NVMe management command line
interface (github.com/linux-nvme/nvme-cli). Follow the installation instructions available on that site.
To determine which drive you want to replace, use the command:
nvme list
If you are searching for a failed drive, you can check each drive using the command:
nvme smart-log <device>
To turn on the identify LED, use the command:
dd if=/dev/nvmeX of=/dev/null
You can also use the ledctl command from the optional ledmon package:
ledctl locate=/dev/rsnvmeX
To get the device serial number for verification, use the command:
nvme id-ctrl /dev/nvmeX | grep -i sn
To take the device offline so that it can be removed:
sh -c"echo 0 >/sys/block/nvmeX/device/delete"
SAS3FLASH command
Learn about the SAS3FLASH command for the adapters 9300-8i & 9305-16i (feature codes EK41 and
EK43).
For details on using the SAS3FLASH command, see https://www.broadcom.com/products/storage/host-
bus-adapters/sas-9305-16i#downloads (www.broadcom.com/products/storage/host-bus-adapters/
sas-9305-16i#downloads). Look under the "Management Software and Tools" section, for the
SAS3FLASH_P15 archive.
See How to use Petitboot bootloader (www.ibm.com/support/knowledgecenter/linuxonibm/liabw/
liabppetitboot.html).
106 Power Systems: Installing the System and Ordered Parts for the IBM Power System IC922 (9183-22X)
Advertisement
Table of Contents
