Table of Contents
Advertisement
2.1.2
STARTER drive/commissioning software
The easy-to-use STARTER drive/commissioning tool can be used for:
● Commissioning,
● Optimization, and
● Diagnostics
You will find a description in the Intranet under the following address:
http://mall.automation.siemens.com
Select the country and then in the menu bar "Products".
In the navigator, set "Drive Technology" → "Engineering software" → "STARTER
drive/commissioning software"
Download, refer under http://support.automation.siemens.com
2.1.3
SinuCom commissioning tool
The simple-to-use commissioning software for PC/PG serves to ensure optimum
commissioning of drives with SINAMICS S120/SIMODRIVE 611 digital. You will find a
description in the Intranet under the following address:
https://mall.automation.siemens.com
Select your country and then in the menu bar "Products".
In the navigator, select "Automation Systems" → "SINUMERIK CNC automation systems" →
HMI software for CNC controls" → "Tools" → "SinuCom".
2.1.4
Correct matching of motors and SINAMICS Motor Modules
Situation / load situation
If the rated current of the SINAMICS Motor Module is higher than the rated
current of the motor, the thermal characteristic (S1) of the motor will determine
the continuous power of the combination.
If the rated current of the motor is higher than the rated current of the SINAMICS
Motor Module, the rated current of the module will determine the available
continuous power.
If the combination is operated in duty cycles, the motor selected must be rated such that the rms current value (I
not exceed the permissible S1 value of the motor.
The following generally applies:
If you identify a range of 2 limit values or characteristics, the lower limit/characteristic in each case determines the useful
range.
1PM6/1PM4 Hollow-Shaft Motors for Main Spindle Drives
Configuration Manual, PPMS, 04/2008, 6SN1197-0AD23-0BP0
2.1 Configuration software
Consequence / result
The SINAMICS Motor Module will not be
fully utilized.
The thermal capacity of the motor will
not be fully utilized.
Configuring
) does
rms
25
Advertisement
Table of Contents
