Sinamics Startdrive Drive/Commissioning Software; Configuring Workflow - Siemens SIMOTICS T-1FW6 Configuration Manual

Configuration
6.2 Configuring workflow
• Comments on system reactions
• Design information of the drive and control components
• Energy considerations of the configured drive systems
You can find additional information that you can download in the Internet at TST
support.industry.siemens.com/cs/ww/en/view/109767888).
6.1.2

SINAMICS Startdrive Drive/Commissioning Software

Overview
The SINAMICS Startdrive commissioning tool offers
• Commissioning
• Optimization
• Diagnostics
You can find additional information that you can download in the Internet at SINAMICS
Startdrive (https://support.industry.siemens.com/cs/ww/en/view/109794362).
Table 6-1 Article number for the SINAMICS Startdrive commissioning tool
Commissioning tool
SINAMICS Startdrive V17
German, English, French, Italian, Spanish, Chi‐
nese (simplified)
6.2

Configuring workflow

Requirements
Your choice of torque motor depends on the following factors:
• The peak and rms torque of the duty cycle required for the application
• The required speed and angular acceleration
• The installation space available
• The required/possible drive arrangement
(single/parallel operation)
• The required cooling method
94
Article no. of the DVD
Startdrive Basic V17: 6SL3072-4HA02-0XA0
Startdrive Advanced V17: 6SL3072-4HA02-0XA5
Startdrive Advanced V17 Upgrade: 6SL3072-4HA02-0XE5
Software Update Service (SUS) for Startdrive Advanced:
6SL3072-4AA02-0XL8
1FW6 Built-in torque motors
Configuration Manual, 09/2022, A5E52220645B AA
(https://