Using expression pedals
If an effect in the PEDAL category (pedal effect) is selected in a patch memory, the application of the effect can
be controlled by an expression pedal.
Using the built-in pedal
The built-in expression pedal can be used to change the application of the effect.
1.
Select a patch memory that has a pedal effect you want to adjust.
Touch
• To change the pedal effect, see
• To add a pedal effect, see
NOTE
When an external pedal is connected, two effects from the PEDAL category can be used. ( →
pedal" on
page 55)
on the Home Screen to check the selected effect in the patch memory.
"Changing amps and effects" on
"Adding effects" on
2
3 3
Pedal effect
page 24.
page 31.
51
"Using an external