Adjusting The Expression Pedal - Zoom G3 Operation Manual

Adjusting the expression pedal

1
To calibrate its sensitivity
While pressing
Following the instructions shown, operate the pedal and press
HINT
2
To adjust the torque
You can use a 5mm hex key (Allen wrench) to adjust the torque of the
expression pedal.
Insert the hex key into the torque adjustment screw on the side of the pedal.
Turn it clockwise to tighten the pedal, and turn it counterclockwise to loosen the pedal.
, set the POWER switch to ON.
NOTE
NOTE
because if you loosen it too much, it could come off
inside the unit, making it impossible to hold the pedal in
place.
- Pressing the pedal does not have much effect.
- The volume or tone changes too much even when
only pressing the pedal lightly.
each time.
37