Setting The Looper - Zoom G11 Operation Manual

Setting the looper

Various looper settings can be made.
Setting the recording time
The length of the recorded phrase can be set.
1.
Drag the TIME knob up or down on the looper control screen ( →
Setting
MANUAL
♩ ×1–64
NOTE
• The setting options include MANUAL and 1–64 quarter notes.
• The looper recording time is between 1.5 and 5 minutes when the UNDO function ( →
• If a setting would cause the maximum recording time to be exceeded, it will be reduced automatically.
• Changing the recording time will delete the recorded data.
Recording time
Explanation
Recording will continue until stopped manually or the maximum
recording time is reached.
Set the value to 1 – 64 quarter notes. The actual recording time
depends on the BPM (tempo) setting ( →
tempo" on page 39).
Recording time (seconds) = 60 ÷ BPM × quarter notes
68
page 67).
"Adjusting the master
page 72) is OFF.