Minimum Volume; Midi Ch (Midi Channel); Exp. Select (Expression Select) - Zoom Pro 4040 Operation Manual

MINIMUM VOLUME

This parameter controls the volume level setting between the
EQ module and the MODULATION module, when the VOL
pedal is fully raised. This is a global parameter which affects
operation of the entire 4040.
MINIMUM VOLUME
MINIMUM VOLUME
Parameter
Explanation
MINIMUM VOLUME: Determines the minimum volume
level when the VOL pedal is fully raised. At a setting of 0
(zero), no sound is heard.

MIDI CH (MIDI Channel)

This parameter controls the channel for the MIDI signal
supplied at the MIDI OUT connector. This is a global
parameter which affects operation of the entire 4040. For
details, please refer to page 26.
Parameter
Explanation
MIDI CH (MIDI Channel): Determines the MIDI send
channel.
When you have changed a global parameter
NOTE
(MINIMUM VOLUME/MIDI CHANNEL) and
want to retain the setting, simply store any patch.
This will also store the global parameter setting. If
you turn off the 4040 without storing a patch, the
global parameter setting will revert to the default
value.

EXP. SELECT (Expression Select)

This parameter determines which module is controlled by
the expression pedal. This parameter can be stored as part of
an individual patch.
EXP. SELECT
Parameter EXP. SELECT
Explanation
EXP. SELECT (Expression Select): Determines which
module is controlled by the expression pedal.
0: OFF
1: PRE
2: EQ
3: MODULATION
4: DELAY
5: REVERB
22
0 – 10
MIDI CH
1 – 16
MIDI CH
0 – 5
The effect of the EXP (expression) pedal depends on
HINT
which module is selected for the current patch. The
direction and intensity of the change depends on the
module settings. Edit the respective parameters and
check the results to find your desired sound.
Modules which are currently off and modules which
NOTE
cannot be controlled by the EXP pedal cannot be
selected (are not displayed). When wishing to
control a module with the EXP pedal, be sure to set
it to on.