Insert A Waypoint In The Active Flight Plan - Garmin G1000 Cockpit Reference Manual

If an existing flight plan is selected, an 'Overwrite existing flight plan? OK
or CANCEL' prompt is displayed. Press the ENT Key to choose to overwrite
the selected flight plan and see a list of the available flight plans on the SD
card. If overwriting the existing flight plan is not desired, select 'CANCEL'
using the FMS Knob, press the ENT Key, select another existing or empty
flight plan, and again press the IMPORT Softkey.
7) Turn the small FMS Knob to highlight the desired flight plan for importing.
8) Press the ENT Key.

INSERT A WAYPOINT IN THE ACTIVE FLIGHT PLAN

1) Press the FPL Key to display the active flight plan.
2) If required, press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired flight plan waypoint. The
new waypoint is inserted before the highlighted waypoint.
4) Turn the small FMS Knob. The Waypoint Information Window is now
displayed.
5) Enter the new flight plan waypoint by one of the following:
a) Enter the user waypoint identifier, facility, or city.
b) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' airport
waypoints to the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
e) Press the ENT Key again to accept the waypoint.
190-01896-01 Rev. A Garmin G1000 Cockpit Reference Guide for the Diamond DA62
Flight Planning
29