Garmin G1000 Cockpit Reference Manual page 156

Annunciations & Alerts
Message Advisory
REGISTER CONNEXT – Data
services are inoperative, register
w/Connext.
SCHEDULER [#] – <message>. Message criteria entered by the user.
SLCT FREQ – Select appropriate
frequency for approach.
SLCT MAG – Select MAGNETIC
NAV ANGLE display units.
SLCT NAV – Select NAV on CDI
for approach.
SLCT NON-MAG – Select
alternate NAV ANGLE display
units.
STEEP TURN – Steep turn
ahead.
STRMSCP FAIL – Stormscope
has failed.
SVT DISABLED – Out of
available terrain region.
SVT DISABLED – Terrain DB
resolution too low.
SW MISMATCH – GDU
software version mismatch.
Xtalk is off.
TIMER EXPIRD – Timer has
expired.
136
Garmin G1000 Cockpit Reference Guide for the Diamond DA62
The GDL 59 is not registered with Garmin
Connext, or its current registration data has failed
authentication.
The system notifies the pilot to load the approach
frequency for the appropriate NAV receiver. Select
the correct frequency for the approach.
The system notifies the pilot to set the Nav Angle
units on the Avionics Settings Screen to Magnetic.
The system notifies the pilot to set the CDI to the
correct NAV receiver. Set the CDI to the correct NAV
receiver.
The system notifies the pilot to set the Nav Angle
units on the Avionics Settings Screen to True.
A steep turn is 15 seconds ahead. Prepare to turn.
Stormscope has failed. The G1000 System should
be serviced.
Synthetic Vision is disabled because the aircraft is
not within the boundaries of the installed terrain
database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second or
better) is not currently installed.
The MFD and PFD have different software versions
installed. The G1000 system should be serviced.
The system notifies the pilot that the timer has
expired.
Comments
190-01896-01 Rev. A