Garmin G1000 Cockpit Reference Manual page 146

Annunciations & Alerts
Message Advisory
GDC1 MANIFEST – GDC1
software mismatch,
communication halted.
GDL59 CONFIG – GDL 59
config error. Config service
req'd.
GDL59 FAIL – GDL 59 has
failed.
GDL59 RTR FAIL – The GDL 59
router has failed.
GDL59 SERVICE – GDL 59
needs service. Return unit for
repair.
GDL69 CONFIG – GDL 69
config error. Config service
req'd.
GDL69 FAIL – GDL 69 has
failed.
GDL69 MANIFEST –
GDL software mismatch,
communication halted.
GDL88 ADS-B 1090 - ADS-B
fault. 1090 receiver failure.
GDL88 ADS-B NO POS -
GDL88 is not receiving position
information.
GDL88 ADS-B NO TX - GDL88
Failure
GDL88 ADS-B TRFC - GDL 88
ADS-B traffic has failed
126
Garmin G1000 Cockpit Reference Guide for the Diamond DA62
The GDC 74A has incorrect software installed. The
G1000 system should be serviced.
GDL 59 configuration settings do not match those
of backup configuration memory. The system should
be serviced.
A fault has been detected in the GDL 59. The
receiver is unavailable. The system should be
serviced.
A fault has been detected in the GDL 59 router. The
system should be serviced.
A fault has been detected in the GDL 59. The
system should be serviced.
GDL 69/69A or GDL 69/69A SXM configuration
settings do not match those of backup configuration
memory. The G1000 system should be serviced.
A failure has been detected in the DL 69/69A or
GDL 69/69A SXM. The receiver is unavailable. The
G1000 system should be serviced.
The GDL 69/69A or GDL 69/69A SXM has incorrect
software installed. The G1000 system should be
serviced.
A failure has been detected in the 1090 receiver.
The GDL 88 is not able to receive position
information.
Unable to transmit GDL 88 messages.
The GDL 88 is incapable of processing traffic
information.
Comments
190-01896-01 Rev. A