Garmin G1000 Cockpit Reference Manual page 94

Hazard Avoidance
5) When finished, press the BACK Softkey to return to the Traffic Map Page.
Showing Additional Traffic Information
1) Select the Traffic Map Page.
2) Press the FMS Knob. A cyan bracket highlights the first selected traffic
symbol. Additional information appears in a window in the upper-right
corner of the Traffic Map Page.
3) To select a different aircraft symbol, turn the FMS Knob to move the cyan
bracket until the selected aircraft traffic symbol is highlighted.
4) When finished, press the FMS Knob again to remove the cyan selection
bracket.
Viewing ADS-B Traffic Status
1) Turn the large FMS Knob to select the AUX Page Group.
2) Turn the small FMS Knob to select the AUX - ADS-B Status Page.
ADS-B Status Page
Item
Traffic Application
Status: AIRBORNE
(AIRB), SURFACE
(SURF), AIRBORNE
ALERTS (CSA)
74
Garmin G1000 Cockpit Reference Guide for the Diamond DA62
Status Message
ON
AVAILABLE TO RUN Traffic application is not currently active, but
NOT AVAILABLE
FAULT
NOT CONFIGURED Traffic application is not available, because it
----------------
Description
Traffic application is currently on. Required
input data is available, and it meets
performance requirements.
application is ready to run when condition(s)
determine the application should be active.
Required input data is available, and it meets
performance requirements.
Traffic application is not available. Required
input data is available, but it does not meet
performance requirements.
Traffic application is not available. Required
input data is not available or the application
has failed.
has not been configured. If this annunciation
persists, the system should be serviced.
Traffic application status is invalid or unknown.
190-01896-01 Rev. A