Table of Contents
Advertisement
10. Factory Default
Factory Default is the erasing of content set in this product. If this product
does not work properly or if used differently, it is recommended to initialize
this product to set factory default settings.
* The firmware that the customer upgraded after the purchase will remain
even after initialization.
Initialization through Web setting
(1) Start the Web setting. (Refer to "8. Initial Setup")
(2) Click "Maintenance" on the top page.
(3) Select "Maintenance" then "Factory Default".
(4) Click "Initialization".
(5) Click "OK".
Initialization is now completed.
After initialization, the product restarts.
After all lights are green, wait for the POWER lamp to turn off once.
(The status varies according to the usage except for the POWER lamp.)
42 of 47
Advertisement
Table of Contents
