Table of Contents
Advertisement
(5) Enter the Administrator password to open the Settings screen,
follow the instructions on the screen, fill in the following fields,
and then enter the screen.
Administrator password field
* Administrator password is necessary to set up this product. If
password is unknown or forgotten, the setting screen cannot be
opened, initialize this product and all the settings will be reset. (Refer
to "10. Initialization")
(6) When input is completed, click "Next".
(7) Select the connection type of this product.
Below are the two connection types,
(a) IPoE(DHCP)
Operating in a network environment where a DHCP server
exists
(b) IPoE(Manual)
Operating with fixed IP
* In order to communicate with the server to enable security scan
function, this product requires IP address setting.
35 of 47
Advertisement
Table of Contents
