(3) Attach the rubber feet to the back of the stand.
● The attached rubber feet are for temporary installation and
the stability of the unit is not guaranteed. When adding an
excessive load or when pulling a cable, there is a danger of
separating the unit from the floor.
● When dust and debris are stuck on the rubber feet, the
adhesion strength to the floor decreases. In that case, remove
the dust and debris using synthetic detergent and water.
Cleaning it increases the adhesion strength. During cleaning,
remove the stand from the main unit.
● When the rubber feet are not in use, keep it out of reach of
children. See a doctor if accidentally swallowed.
Caution
32 of 47