Table of Contents
Advertisement
Initialization through RESET switch
Initialize using the RESET switch of this product.
(1) Confirm that the POWER lamp of this product is green.
Wait for about 140 seconds when power is turn back on or after
turning on the power.
(2) Press and hold the RESET switch on the back of this product
with a thin rod shaped object (material that does not pass
electricity, toothpick tip etc.) and release it when the POWER
lamp, NETWORK lamp and WIRELESS lamp start to blink green.
It takes about 6-10 seconds until the POWER lamp, NETWORK lamp,
and the WIRELESS lamp to blink green.
Initialization is now completed.
After initialization, the product restarts.
After all lights are green, wait for the POWER lamp to turn off once.
(The status varies according to the usage except for the POWER lamp.)
43 of 47
Advertisement
Table of Contents
