SEVERIN MW-7855 Instructions For Use Manual page 30

4 beeps indicate that the entire programme has finished.
Hint: This memory function is especially helpful when using the microwave to cook
food at different power settings. While a higher power setting is selected initially,
the power can be reduced at a later stage in order to keep the food hot, and to
ensure that the heat is evenly distributed when the food is already done.
Quick-programme
The most commonly used microwave time-settings can be called up simply by pressing
With this function, the microwave power setting is always 100%.
Press once
Press twice
Press 3 times
Press 4 times
..
Press 11 times
Note: the key must be pressed successively without pauses. The cooking process starts 2
seconds after the cooking-time has been selected.
Example: to programme the microwave function for a cooking time of 2 minutes at
100% power.
1. Press 3 times. The display shows 2:00 and ENTER COOK TIME.
The programme starts after 2 seconds, and COOK MICRO appears in the display.
Automatic cooking programmes
These automatic cooking programmes are helpful when cooking or heating up food without
having to select any particular settings, e.g. for power or cooking time. Once the programme
has started, the display will show the appropriate symbols representing the function
currently active. (e.g. MICRO for microwave).
Baked potatoes (
During the baking process, steam builds up inside the
potatoes. To allow this steam to escape, the potatoes
should be evenly punctured prior to baking.
1. Turn , until the display shows CODE 01.
2. Press
and the number corresponding to the weight
entered.
3. Press . The display shows CODE COOK MICRO.
Note: leave the potatoes to stand inside the appliance for 5 to 10 minutes after the
programme has finished.
=> 30 seconds
=> 1 minute
=> 2 minutes
=> 3 minutes
=> 10 minutes
)
. The display shows ENTER AMT
Weight
1 x 1 (110-180g)
2 x 2 (180-300g)
3 x 3 (300-430g)
4 x 4 (430-560g)
30
.
Cooking time
5:40
9:40
13:00
17:00