Empire Comfort Systems DVCT40CSP95N-1 Installation Instructions Manual page 35

MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
Remote Dimmer Control (Light)
The auxiliary function controls the power light outlet by the
dimmable light control. To activate this function, use the Mode
Button Figure 57 to index to the light icon. See Figures 74 and 75.
The intensity of the output can be adjusted through six levels. Use
the Up/Down Arrow Buttons Figure 57 to adjust the output level. A
single "beep" will confirm reception of the command.
NOTE: This function is available only with the IFC control Module.
OFF
OFF
Split Flow Control
The secondary burner is controlled by the split Flow. To activate
this function use the Mode Button Figure 57 to index to the
SPLIT FLOW mode icon. See Figures 76 and 77.
Pressing the Up Arrow Button will activate the secondary burner.
Pressing the Down Arrow Button will turn the secondary burner
off. A single "beep" will confirm the reception of the command.
OFF
40651-2-0320
Figure 74
Figure 75
Figure 76
OFF
Remote Auxiliary Relay Control (optional with this fireplace)
The auxiliary function controls the AUX relay outlet. To activate
this function use the Mode Button Figure 57 to index to the AUX
icon Figures 78 & 79. Pressing the Up Arrow Button will activate
the outlet. Pressing the Down Arrow Button will turn the outlet off.
A single "beep" will confirm the reception of the command.
Figure 77
Figure 78
Figure 79
Page 35