Table of Contents
Advertisement
Menu: Avaya
The Avaya Menu can be accessed by pressing the Menu softkey (in the idle state) or the Option softkey
(when on an active call) for at least 2 seconds. The options available will depend on those configured on
Avaya DECT Mobility Manager by your System Administrator and the state of the phone (Idle or active
on a call).
Menu
OK or hold down Menu for 2 seconds
Avaya
Avaya Menu in the Idle state
- The Directory allows you access to telephone numbers stored on the system.
Directory
•
- This Directory is the IP Office system directory.
External Dir
•
- This Directory contains the IP Office Users and Hunt groups.
Internal Dir
- Allows you to pick up any call ringing on another extension.
Call Pickup
Directed Call Pickup
enter the extension number of the extension receiving the incoming call, after the short code is
presented.
•
opens the directory to select an entry from the directory to pickup the call.
Directory
•
allows you to enter the number to pickup the call.
User Input
•
opens the Caller List, Redial or Telephone Book to select an entry to pickup the call.
Selections
- Select
Send All Calls
'Do Not Disturb' mode.
- Allows you to configure your call forwarding options. After selecting call forward you are
Call Forward
presented with the following options.
•
- Forwards all calls unconditionally to the destination specified by the forward number set for
All
the users extension.
•
- Forward calls to the destination specified when the phone is busy.
Busy
•
- Cancels all call forwarding options. However, the forward number is retained.
Cancel
Note: If the forward number is not configured, the call forward feature will not work. The forward number
must be configured before configuring the Call Forward feature. See
configure your forward number.
(Unpark) - Allows you to retrieve a parked call. See
Ride
•
opens the directory to select an entry from the directory to unpark the call.
Directory
•
allows you to enter the number to unpark the call.
User Input
•
opens the Caller List, Redial or Telephone Book to select an entry to unpark the call.
Selections
- Allows access to wml sites. Select a site from the list (If configured by your System
WML Portal
Administrator) or enter a wml address manually.
- Allows you to pick up a call ringing on a specific extension. To use this feature
to set your extension into 'Do Not Disturb' mode. Select
Enable
Calling
for details on how to
Calling
for details on unparking a call.
to remove
Cancel
27
Advertisement
Table of Contents
