Advertisement
Wall control installation
1
Check the accessories required for
installation.
3
Remove the wiring terminals form the
terminal cover.
5
Plate and mount this plate to 86 box
using screws.
(Note: please use the
gradienter for calibration)
Delta Confidential
1.
2.
3.
Wall control installation
2
Use a plastic crowbar to insert the
separation port and separate the panel
from the base.
4
Connect the wiring according to the
wiring diagram. (Note: stripping length
needs to be between 5~8mm)
6
Reinstall the wiring terminals in its
correct locations. Reinstall the front
module.
7
Power-on test after installation.
3
Advertisement
