Huawei UA5000 Commissioning Manual page 20

UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI
Jumper
S2
S3, S8,
and S10
S11 is used to check whether the running LED on the front panel is valid.
the meanings and settings of S11.
Table 3-2 Meanings and settings of the H303ESC S11
Jumper
S11
DIP switch S6 is used to set the type of external analog sensors.
and settings of S6.
Table 3-3 Meanings and settings of the H303ESC S6
DIP Switch
S6-1 to S6-6
S6-7 to S6-8
Issue 04 (2012-06-25)
Settings
2-3 connected
1-2 connected
2-3 connected
1-2 of S3, S8, and S10
connected
2-3 of S2 connected; 1-2 of
S8 and S10 connected
2-3 of S8 and S10 connected,
S3 connected unlimited
Settings
1-2 connected
2-3 connected
Settings
ON
OFF
Reserved
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Meanings
The serial port SIO1 is
RS-422.
The serial port SIO2 is
RS-232.
The serial port SIO2 is
RS-422.
The serial port SIO3 is
RS-232.
The serial port SIO3 is
RS-422.
The serial port SIO3 is
RS-485.
Meanings
The running LED on the board
is valid.
The running LED on the board
is invalid.
Table 3-3
Meanings
The external analog sensor is of the
current type.
The external analog sensor is of the
voltage type.
-
3 Stand-Alone Commissioning
Default Settings
2-3 connected
1-2 of all jumpers
connected
Table 3-2 provides
Default
Settings
1-2 connected
provides the meanings
Default
Settings
ON
-
12