Installing The Drive Sprocket; Installing The Drive Belt - Yamaha Z200N Service Manual

FUEL
4310
a
3
1
2
a
DRIVE BELT
4330
4
b
4335

INSTALLING THE DRIVE SPROCKET

Install:
• Drive sprocket
Universal holder
YU-01235 / 90890-01235

INSTALLING THE DRIVE BELT

Install:
• Drive belt
CAUTION:
• Never forcefully twist, turn inside out, or
bend the drive belt.
• Do not let oil or grease get onto the drive
belt.
• Minimum 25 mm (1.0 in) a.
Installation steps
(1) Finger tighten the drive belt tensioner
bolt 1, and then loosen it 90˚.
(2) Install the drive belt 2 by pushing the
drive belt tensioner 3 to the loosest
point on the belt.
NOTE:
Install the drive belt from the drive sprocket
side a and working it counterclockwise.
(3) Install the spring 4.
(4) Loosen the drive belt tensioner bolt
and stretch the drive belt with the
force of the spring.
(5) Adjust the drive belt tension so that
side b of the drive belt has no slack,
and then tighten the drive belt ten-
sioner bolt.
Drive belt tensioner bolt
40 Nm (4.0 m • kgf, 29 ft • lb)
4-25
E
4
4