Yamaha Z200N Service Manual page 335

– +
ELEC
Å
ı
8230
IGNITION SYSTEM
8200
8210
8220
8240
CHECKING THE IGNITION SPARK GAP
WARNING
• Do not touch any of the connections of
the spark gap tester lead wires.
• Do not let sparks leak out of the removed
spark plug cap.
• Keep flammable gas or liquids away,
since this test can produce sparks.
Check:
• Ignition spark gap
Above specification → Replace the
spark plug.
Below specification → Check the con-
trol unit output.
Ignition spark gap
9 mm (0.4 in)
Å For USA and Canada
ı For worldwide
Checking steps
(1) Remove the spark plugs from the
engine.
(2) Connect a spark plug cap to the spark
gap tester.
(3) Set the spark gap length on the adjust-
ing knob.
Spark gap tester
YM-34487 / 90890-06754
(4) Crank the engine and observe the
spark through the discharge window
of the spark gap tester.
8-12
E
8