Yamaha Z200N Service Manual page 347

– +
ELEC
FUEL CONTROL SYSTEM
CHECKING THE BATTERY
Refer to "CHECKING THE BATTERY"
on page 3-19.
CHECKING THE FUSES
Refer to "CHECKING THE FUSES" on
page 8-13.
CHECKING THE FUSE HOLDER
Refer to
HOLDER" on page 8-13.
MEASURING THE PULSER COIL
OUTPUT PEAK VOLTAGE
Refer to "MEASURING THE PULSER
COIL OUTPUT PEAK VOLTAGE" on
page 8-15.
MEASURING THE CRANK POSITION
SENSOR OUTPUT PEAK VOLTAGE
Measure:
• Crank position sensor output peak
voltage
Below specification → Replace.
MEASURING THE THROTTLE
POSITION SENSOR OUTPUT
VOLTAGE
Refer to "MEASURING THE THROT-
TLE POSITION
VOLTAGE" on page 8-20.
MEASURING THE ENGINE COOLING
WATER TEMPERATURE SENSOR
RESISTANCE
Refer to "MEASURING THE ENGINE
COOLING
SENSOR RESISTANCE" on page 8-19.
CHECKING THE ELECTRICAL OIL
PUMP
Refer to "CHECKING THE ELECTRIC
OIL PUMP" on page 3-14.
8-24
"CHECKING THE
SENSOR OUTPUT
WATER TEMPERATURE
E
8
8
8
FUSE
8
8
8
8
8