Removing/Installing The Sub Wire Harness - Yamaha Z200N Service Manual

POWR

REMOVING/INSTALLING THE SUB WIRE HARNESS

3
2
2
Order
Throttle position sensor coupler
1, atmospheric pressure sensor
coupler 2 and intake air
temperature sensor coupler 3
Fuel pressure sensor coupler 4
Crank position sensor coupler 5
and pulser coil coupler 6
Control unit coupler 7
1 Oxygen density sensor coupler
2 Engine cooling water
temperature sensor coupler
WIRE HARNESSES
5
1
6
Job/Part
4
Q'ty
Refer to "MEDIUM-PRESSURE FUEL
LINE" on page 4-2.
Refer to "HIGH-PRESSURE FUEL LINE
ASSEMBLY" on page 4-30.
Refer to "STATOR ASSEMBLY" on
page 5-12.
Refer to "CONTROL UNIT" on page 5-14.
1 (green)
1
For installation, reverse the removal
procedure.
5-25
7
Remarks
E
5
5
1
5175