1
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
A
-
Removing the Case (not shown)
1. Remove the Case.
-
Removing the Grille Assy (Fig.1)
1
Remove the six screws.
B
Disconnect the connector and then remove the
Grille Assy.
*) When attaching the Grille Assy onto the main
body, make the Grille Assy stick to the main
body by hand (there shall be no gap), and fix
them using the screws.
C
-
Removing the Monitor Unit (Fig.2)
1
Remove the five screws.
Disconnect the connector and then remove the
D
Monitor Unit.
*) Be sure to place the remote controller with the
optical receiver facing up. Otherwise the leads
of the optical receiver may be bent.
E
F
254
1
2
1
1
1
1
1
AVIC-D3/XU/UC
2
3
Grille Assy
1
Monitor Unit
3
4
1
1
1
Fig.1
1
1
Fig.2
4