Pioneer AVIC-D3/XU/UC Service Manual page 226

1
A
B
No. Inspection item
1 SRAM/SDRAM test
C
2 SENSOR test
3 RGB test
4 MS5 check
5 Region code
D
4. How to select test mode menu
Select a desired menu by [ ] and [ ] keys, and execute by pressing [ENTER] key.
Pages can be changed by [ ] and [ ] keys.
5. Version information
Version No. for BOOT section = X.XX System software does not exist in SDRAM.
Version No. for BOOT section = X.XX Version No. for SDRAM = Y.YY
E
F
226
1
2
TESTMODE MENU [SERVICE_MENU(THCHNICAL)]
1. SRAM / SDRAM test
2. SENSOR test
3. RGB test
4. MS5 check
5. Region code
<== back page
SYSTEM Ver. : [BOOT] 0.14 [OS] 0.14
Outline of inspection Content if inspection
Memory inspection SRAM : Device inspection and bus inspection are performed against all
SDRAM : Device inspection and bus inspection are performed against all
Sensor inspection G sensor, gyro, power supply voltage and installation condition are
displayed.
The system will return to "menu" by BACK key.
Image RGB inspection RGB inspection
(Upper half, 8 colors. Black/blue/red/pink/green/light blue/yellow/white
display. Lower half, 3 colors. Red/green/blue.)
Switching can be made by [
The system will return to "menu" by BACK key.
MS5 check MS5 mechanism test mode inspection.
Region code display Region code display.
AVIC-D3/XU/UC
2
3
==> next page
SRAM domains.
Data will be protected. (applicable to both 32M and 64M)
SDRAM domains.
Data will be protected for both BIOS domain and USER domain.
The function for SDRAM all domain inspection will activate by
the built-in instruction RAM.
green (FULL) blue (FULL)
] and [
3
4
red (FULL)
] keys.
4