Pioneer AVIC-D3/XU/UC Service Manual page 250

1
12. Memory all clear (Not for service)
A
B
• SRAM (application domain) is cleared.
• FLASH (application domain) is cleared.
• Sensor learning level is cleared.
• If SRAM clear is not successful, FLASH will not be cleared.
• After displaying the test screen, press the [ 0 ] key to execute the above processing.
• The execution results are displayed.
• Only when all is "OK", press the [ 8 ] key to end the production engineering test and return to the menu screen.
13. Software version display
C
D
• The software versions are displayed.
• As for the GPS model, it will be considered OK if "07 EW (0x37)" is displayed in the case of EW model and
if "07 UC (0x38)" is displayed for UC model.
14. Picture RGB check
E
• Bridge tests are performed for RGB.
F
• Pressing the [ 4 ] key or the [ 6 ] key switches the screens.
• RGB is plotted in the following pattern: R100% -> R50% -> G100% -> G50% -> B100% -> B50%
• 6 screens are displayed in total.
250
1
2
12. All memory clear
The clearance of SRAM (application domain)
The clearance of Flash (application domain)
Elimination of a sensor study value
[ 0 ] Inspection is performed.
13. Software version
System boot / OS version
Application version
Syscom version
Monitor micom version
GPS program version
GPS model
Mecha micom version
[ C ] It returns to a screen.
AVIC-D3/XU/UC
2
3
0.17 / 0.17
0.010200
2.01
7.01
10.20 05/03/22 0.60
07 EW (0x37)
1.00
3
4
4