5
8. [X-3212 Servo Test (5-0)]: RF level display state screen
Note) Value of the data will change upon execution of the command.
Operation cannot be made until completion of displaying the value from F. Bal (0) to AS Normal (1).
[1]
Display of RF level
[2]
Display of Error rate
[3]
Succeed to Focus Close 1 state screen
[OK]
Execution/stop
[BACK] 5, [X-3212 Servo Test (4-0)]: Return to Tracking Close state screen.
EDC test operational specifications
Note) The operational method is common to both EDC-1 and EDC-2 tests.
1. [X-3212 EDC-1/2 TEST]: Initial screen
Note) Value of the ID will change upon execution of the command.
[1]
Go to setting screen of 2, [X-3212 EDC-1/2 Test Layer 0]
[2]
Go to setting screen of 3, [X-3212 EDC-1/2 Test Layer 1]
[3]
Ejection of the disc
[OK]
Execution
[BACK] Exit from MS5 check.
5
6
AVIC-D3/XU/UC
6
7
7
8
A
B
C
D
E
F
239
8