Table of Contents
Advertisement
5
6.9 NAVIGATION TEST MODE
1. Key operation
Use the remote controller for operation. (Part No. : CXC6317 (Operation mode switch : SW1 : AVH, SW2 : DVD))
Basic operation method in the remote controller.
• [
] (The cursor is moved up) ....................
• [
] (The cursor is moved down) ...............
• [
] (The cursor is moved left) ...................
• [
] (The cursor is moved right) .................
2. How to start the test mode
1. When +Battery and ACC are ON, push RESET and EJECT buttons simultaneously.
2. Release RESET button only.
3. When "password entry screen" is displayed, release EJECT button.
4. Enter the password.
5. When the password has been entered, press [ENTER] key.
6. If the correct password has been entered, the test mode menu will be displayed.
* The password entry screen, as the one used in the previous model, is no longer displayed.
<< Password for the service >>
[ 8 ]
[ 1 ]
[ 8 ]
[ 3 ]
[ 7 ]
If 8 digits or more are entered and [ENTER] key is pressed, it will be treated as a password error.
• Password entry screen
• Password OK : After 2 seconds or so, the screen will automatically move on to the menu screen.
• Password NG : Nothing will be displayed, and reboot action will be taken.
5
6
[ 2 ] key
[ 8 ] key
[ 4 ] key
[ 6 ] key
[ 2 ]
[ 0 ]
[ 8 ].
Please push the [RESET] button.
<Attention> This is a specal service application
Not for customer use.
Please input the whole password,then push the [OK] button.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Password right.
Go to next page.
AVIC-D3/XU/UC
6
7
• [ OK ], [ ENTER ] .......................................
• [ BACK ] .....................................................
• [ NAVI ] ......................................................
• [ MENU ] ....................................................
7
8
A
[ 5 ] key
[ C ] key
[ 7 ] key
[ 0 ] key
B
C
D
E
F
223
8
Hide quick links:
Advertisement
Table of Contents
