Pioneer AVIC-D3/XU/UC Service Manual page 240

1
2. [X-3212 EDC-1/2 Test Layer 0]
A
B
Note) Value of the ID will change upon execution of the command.
[1] Shift the blue digit of the ID to the right by one digit.
[2] Shift the blue digit of the ID to the left by one digit.
(Shifting can be made up to the 3rd digit from the left.)
[3] The number of the blue digit of the ID is increased by 1.
[4] The number of the blue digit of the ID is decreased by 1.
[5] Start of EDC test
[OK] Execution
C
[BACK] Exit from MS5 check.
3. X-3212 EDC-1/2 Test Layer 1]
D
Note) Value of the ID will change upon execution of the command.
E
[1] Shift the blue digit of the ID to the right by one digit.
[2] Shift the blue digit of the ID to the left by one digit.
(Shifting can be made up to the 3rd digit from the left.)
[3] The number of the blue digit of the ID is increased by 1.
[4] The number of the blue digit of the ID is decreased by 1.
[5] Start of EDC test
[OK] Execution
[BACK] Exit from MS5 check.
F
240
1
2
AVIC-D3/XU/UC
2
3
3
4
4