Recording From A Disc; Giving (Editing) Titles To Tracks Or Groups - JVC UX-G950V Instructions Manual

Recording from a Disc

You can record tracks in digital recording from a CD onto
the USB device.
• Do not vibrate the System while recording/editing
tracks. Take care especially while "WAIT" is shown on
the display. It may damage the recorded tracks on the
System.
Before recording....
Connect a recordable USB device to the USB MEMORY
REC/PLAY ( ) terminal. (See also page 6.)
1
Start and stop playback of the disc.
2
Select the first track you want to record.
3
Enter recording mode.
(on the main unit)
4
Select a group to record tracks into.
• You can also select a group from a list shown on the
TV screen.
GROUP SELECTION
GROUP01
GROUP02
GROUP03
GROUP04
NEW GROUP
PLEASE SELECT GROUP IN WHICH YOU WANT TO RECORD.
THEN PRESS ENTER TO START RECORDING.
USE % TO SELECT GROUP.
TO EXIT, PRESS 7.
• If "NEW GROUP" is selected, the System will
automatically create the new group as "001_group."
If "001_group" already exists, "002_group," "003_
group," etc. will be created.
The System records from the
track to the last one.
5
Start recording.
Both recording and playback start at the same time.
When playback ends, recording also stops.
• You cannot change the source while recording.
• If Program Play is activated (see "Programming the
Playing Order—Program Play" on page 24), the tracks
are recorded in the programmed order.
To stop recording
manually:
Giving (Editing) Titles to Tracks
or Groups
INFO
You can give titles (up to 24 characters) to the tracks and
groups (up to 28 characters) in the USB device.
• While playing, you cannot edit track/group titles.
1
Start and stop playback of the USB device.
2
Select a track/group you want to edit.
To select a track:
To select a group:
(while holding...)
To record the playing
track (1 track):
During play or pause...
(on the main unit)
Then, repeat step 4 on the
left column.
Remote
ONLY
Continued on the next page
28