JVC UX-G950V Instructions Manual page 42

Menu Item
DIGITAL AUDIO OUTPUT
DOWN MIX
D. RANGE COMPRESSION You can enjoy powerful audio even at a low volume level while playing Dolby
RESUME
ON SCREEN GUIDE
DivX REGISTRATION
39
Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the
rear.
PCM ONLY: When connecting to audio equipment which is compatible with only
linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-
in DTS decoder.
This setting is effective for digital audio output if "DIGITAL AUDIO OUTPUT" is
set to "PCM ONLY."
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
Digital software.
AUTO: Select to apply the effect to multi-channel encoded software.
ON: Select to always use this function.
You can select Resume.
ON: The System resumes playback from the position where playback has been
stopped.
OFF: Resume is deactivated.
Activate (ON) or deactivate (OFF) the on-screen guide (see page 10).
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded,
the System's Registration Code is overwritten for copyright protection.
Contents