Synchronized Disc Recording - JVC UX-GD7 Instructions Manual

4
Start recording.
On the main unit
To stop recording:

Synchronized Disc Recording

You can start and stop both disc play and tape recording at
the same time.
To record the entire disc
1
Load a disc and insert a recordable cassette.
• If the current playing source is not the CD player, press
DVD/CD 3, then 7.
2
Check the tape running direction and Reverse mode
settings on the display.
• See step 2 of "Recording on a Tape" on page 31.
3
Select the disc number you want to start recording
from.
On the main unit
4
Start recording.
The System automatically
creates 4-second blanks between
the tunes recorded on the tapes.
On the main unit
• When either disc play or recording ends, both disc player
and the cassette deck stop at the same time.
32
To record a "Live" disc
It will not be desirable to put 4-second blank portions
between the tunes recorded on the tape.
To record the entire disc without any interruption
recorded, start playing the disc (press DVD/CD 3), then
pause the disc play (press 8) and go back to the
beginning of the current chapter/track (press 4) before
pressing REC.
To record Program Play or Random Play
1 Select Program Play (and make a program) or Random
Play, but do not start playback.
2 Press REC to start recording.
To record only your favorite track
You can specify tracks to be recorded on the tape while
listening to a disc.
• This function is not available for DVD Video.
1
Start playing a disc.
2
While a track you want to record on the tape is
playing...
The disc player returns to the
beginning of that track and the
track is recorded on the tape.
After recording the track, the
disc player and cassette deck
On the main unit
automatically stop.
3
Repeat steps 1 and 2 to record other tracks you want.
• You can exchange the discs if necessary.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.