Presetting Automatic Dvd Sound Increase Level; Changing The Display Brightness; Setting The Eco (Ecology) Mode; Changing The Scanning Mode - JVC UX-G950V Instructions Manual

Presetting Automatic DVD Sound
Increase Level
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level for
the currently loaded DVD, so you do not have to adjust the
volume when you change the source.
• This only functions for DVD Video and DVD-VR.
While "DVD/CD" is selected as the source...
(while holding...)
Original recording level.
NORMAL
Output level is increased (less than
MIDDLE
"HIGH").
Output level is increased (more than
HIGH
"MIDDLE"). [Initial setting]

Changing the Display Brightness

You can dim the display.
While the System is turned on...
(Canceled)
Dims the display.
DIM 1/2
Dims the display during playback of still/
AUTO
moving pictures.
• Dimmer is canceled when playback stops.

Setting the ECO (ecology) Mode

Remote
ONLY
Setting the ECO mode allows you to reduce power
consumption by turning the display off while on standby.
While the System is on standby...

Changing the Scanning Mode

This System supports progressive scanning.
Select the video signal output according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high quality
picture playback by selecting "PROGRE."
Before playback...
(while holding...)
RGB
Y/C
PROGRE
(Canceled)
INFO
For a conventional TV.
Select to send the composite video signals
or RGB signals through the AV (SCART)
terminal.
For a conventional TV.
Select to send S-Video signals through the
AV (SCART) terminal.
For a progressive TV.
Select to enjoy a progressive scanned
picture through the VIDEO OUT
(COMPONENT) jacks.
• The PRGR. (Progressive) indicator lights
on the display.
Remote
ONLY
16